INVERTERS AC

Inverters AC

MAIN FEATURES

Totally programmable input Main Tension
Permissible variation input voltage within +15% and +20%
Permissible variation input frequency within +5% and -5%.
Sinusoidal PWM modulation control.
Latest intelligent IGBT transistors technology.
Signals control by Remote/Local Panel and external signals: Potenciometer 5kW ; 0VDC .. 10VDC; 0VDC .. 5VDC; -5VDC .. +5VDC; 0mADC .. 20mADC; 4mADC .. 20mADC and their oposites.
Double PWM carry frequency programable within the range 2kHz to 16kHz.
Adjustable output frequency.
Output frequency setting resolution 0.01Hz for digital input and 0.1Hz for analogic input.
Output frequency accurancy +/-0.01Hz
Voltage / Frequency characteristics from lineal to parabolic curve programmable.
Built-in RS-485 communication interface port allows settings and date control and Ascii code protocol.
99 units inverter can be put under the centralized control of computer. The control may be for individual inverter or for groupe inverters.
4 digital photo-coupler input terminals and all their are designed as programmable input terminal.
2 analogic input terminals: +10VDC; +/-5VDC; +5VDC; 20mADC
Upper and lower frequency are programmable
Acceleration and desacceleration times are programmable for each speed.
Special function for soft acceleration/desacceleration selection.
Special function for save energy (Automatic Output Viltage Regulation)
Skip frequency programmable.
Width skip frequency programmable
Dinamic brake
Injection DC brake and start frequency, braking voltaje and time all programmable.
2 digital output multi-function signal
2 digital output rele signal.
Selectable output analogic meter: Hz, Irms, VDC, Vout.
Programmable Voltage Boost level from 0% to 30% of output current.
Built-in PLC function: Programmable and automatic function control for all speeds and their acceleration and desacceleration times, times running for each speed, and 5 differents automatic modes.
Multi-speed by means combination of digital input of 4 digits and 5 speed levels.
Programmable stall prevention current level from 10% to 100%
Permissible overload up to 200%
Regenerative overvoltage protection
Motor rating protection setting 10% to 100% of inverter rating
Overvoltage protection up to 130% of Line Voltage.
Undervoltage protection up to 70% of Line Voltage.
4 different Display Mode: Control, Monitoring, Programming, Alarm.
Double security programmation security lock date programmables.
Digital display four digits with direct information of: Hz, RPM, VDCinput, Vrms, Irms, Terminal status.
Alarm indications: Overvoltage, Undervoltage, Overload, Overheat, Overcurrent, Communication error, Alarm history.
Low noise design.

fconverter..JPG (17428 bytes)

STANDARD ESPECIFICATIONS

CONTROL
Control Method	Sinusoidal PWM modulation; 2 or 3 phases modulation selectable
Close loop control	Quadrature input clock feed back by encoder
Open loop control	Panel, Potentiometer, 0VDC to 10VDC; 0VDC to 5VDC; +5VDC to -5VDC; 0mADC to 20mADC; 4mADC to 20mADC and their inverses.
Output Frequency	200Hz; 650Hz; 1500Hz; 3000Hz in function to versions
Frequency setting resolution	0.01Hz for digital input; 0.1Hz for analog input
Frequency accurancy	+/-0.01Hz
Volt/Freq characteristics	from linear to parabolic curve programable
Computer interface	Built-in RS-485 communication port allows settings and date control. Up 99 unit inverters can be put under centralized control of computer.
Multi-function digital input	4 photo-coupler input terminals are all designed as programmable input terminal
Multi-function analog input	2 programmable terminals. The first by tension (10V; +/-5V); the second by signal (+5V; 20mADC)
Frequency Skip	Setting skip frequency and width
PWM carry frequency	Programable in the range of 2kHz to 16kHz
Upper/Lower limit frequency	Programable upper/lower limit frequency

OPERATING FUNCTION
Acceleration/deceleration time	0.1 to 6553 sec. and selection soft acceleration/deceleration
Regenerative discharge braking	Built-in or external as option in function versions.
DC injection braking	Injection start frequency, braking voltage and time all programmable
Automatic restart	Speed searching to recover a FREE RUN motor.
Multi-function digit output	2 terminals are open collector output. 2 terminals are Normal open contact relay output. Any of the above outputs are programable.
Multi-function analog output	Selectable output for analog meter: Hz; Irms; VDC; Vout (1V/1mADC)
Voltage boost	Programable voltage boost level from 0% to 30%
Output voltage regulation	Enable/Disable setting by software
Automatic step run	Step running by 5-speed setting, 5-acc/dec, time, 5-period time and 5-auto mode.
Multi-speed run	With the combinations of the 4 digit input 5 speed levels can be selected

PROTECTIONS
Short-circuit protection	Between output phases (U-V-W); Between output phases and earth (Optional)
Momentary power interrupt	Programable restart function
Stall prevention	Programable stall current level from 10% to 200%
Over load current	Adjustable up to 200%
Motor rating	Setting 10% to 100% of inverter rating
Over voltage	130% of line voltage
Under voltage	70% of line voltage
Over temperature	Fin over heat and external over heat input

DISPLAY
Multi-function monitor display	Hz, RPM, VDC input, Vrms, Irms and terminals status
Alarm indications	Over voltage, Under voltage, Over load, Over heat, Over current, Communication error, Alarm history
Status indications	Forward, Reverse, Hz, I

INSTALATION
Service enviroment	Indoor, Altitud 1000 m (3300 ft) maximum. Must not be exposed to direct sunlight or subject to corrosive or flammable gases or fluids.
Temperature	from -10ºC to +40ºC
Relative humidity	90% maximum (no condensation allowed)
Vibration	Acceleration at 0.5G maximum (20Hz to 50Hz); Amplitude at 0.1mm maximum (50Hz to 100Hz)

Return